RAM Mount Phone en tablet set buisklem RAM-B-316-121B-202-AP15U

RAM-B-316-121B-202-AP15U
€119,95 €99,13 Excl. btw
  • Beschikbaarheid: Niet op voorraad
  • Levertijd:In bestelling bij leverancier
Geschikt voor rolstoel, machine, autostoel, kinderwagen etc. ...Meer informatie
Niet op voorraad

Product omschrijving

  • Merk:RAM Mount
  • Artikelnummer:RAM-B-316-121B-202-AP15U
  • Beschikbaarheid: Niet op voorraad
  • Levertijd:In bestelling bij leverancier
Het 45 cm hoge statief is zeer stabiel, maar kan gemakkelijk in de gewenste richting gebogen worden Statief kan eenmalig op lengte afgezaagd worden. Bovenkant geschikt voor B-kogel voor tablet en smartphonehouders. De onderzijde bestaat uit de RAP-B-121BU klemhouder van stevig composiet voor stangen tussen 1,6 cm tot 3,2 cm.

(naar keuze met meerprijs ook de stevigere aluminium klem met 90 graden hoek RAM-B-121BU) of de nieuwe Tough-claw RAP-B-400U.

The EZ-ON/OFF™ flexible seat clamp mount consists of a universal clamp base, 18" (48 cm) flex rod, single socket mounting system and custom high strength composite cradle for the Apple iPad and iPad 2. The clamp base is modular in design; it can easily be attached to tubes and rectangular surfaces, ranging from from 0.625" to a maximum of 1.25". The 18" flex rod is more rigid than flexible but can be bent into optimum position for perfect viewing of your iPad.


In deze set compleet met naar keuze verschillende houders:

Set 1: RAM Mount Apple iPad slide-in houder RAM-HOL-AP15U
RAM heeft speciaal voor de iPad een houder ontworpen die aan RAM mounting componenten bevestigd kan worden. De houder (cradle) omklemt de iPad stevig zonder het slanke ontwerp van de iPad te verstoren.
This cradle is designed to hold the following devices:
Apple iPad 4 (With Lightning Connector) WITHOUT CASE
Apple iPad 3 WITHOUT CASE
Apple iPad 2 WITHOUT CASE
Note: Niet geschikt voor iPad 1

Features:
1. Easy access to electronic ports
2. Patent pending roller design for super smooth placement and removal of the iPad

Material:
High Strength Composite

Set 2: RAM Mount Tab-tite universele 10" tablethouder RAM-HOL-TAB-LGU
De RAM Tab-Tite cradle heeft een veermechanisme waardoor de tablet snel te verwijderen is uit de cradle. Met uitwisselbare uiteinden is is deze houder maximaal flexibel. Alle knoppen en uitgangen blijven bereikbaar. Ook geschikt voor iPad met bumpercase (zie afmetingen) .
Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

Compatible Devices:
10" Tablets with LifeProof nüüd cases
10" Tablets with Lifedge cases
10" Tablets with Heavy duty cases (Griffin, Otterbox, Gumdrop etc)
Apple iPad 4 (With Lightning Connector)
Apple iPad 3
Apple iPad 2
Apple iPad 1
Samsung Galaxy TAB 10.1

iPad AIR? kies set 8 (met dikke case) of set 6 (zonder case)!

Included With Purchase:
(1) Spring loaded back plate
(2) Support cups for thin tablets
(2) Support cups for wide tablets
Mounting hardware

The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.

Er zitten 2 verschillende houders (cradle) bij om de Tab-Tide geschikt te maken voor meerdere maten tablets.
Check vooral de maten van uw tablet met de onderstaande specificaties (gemeten in portrait stand).
 
       
Cradle 1 Dimensions:
Hoogte: 21,6 cm  minimum tot 27,3 cm maximum
Breedte: Maximum tot 19,7 cm
Dikte hoeken: Maximum tot 1,4 cm
 
Cradle 2 Dimensions (extra dikke cases):
Hoogte: 22,2 cm  minimum tot 27,3 cm maximum
Breedte: Maximum tot 21,0 cm
Dikte hoeken: Maximum tot 2,8 cm
 

Set 3: RAM Mount Klemhouder iPad mini, Google Nexus RAM-HOL-TAB2U
De RAM Tab-Tite cradle heeft een veermechanisme waardoor de iPad mini snel te verwijderen is uit de cradle.  knoppen en uitgangen blijven bereikbaar (m.u.v. aan/uit en hoofdtelefoon ingang).. Ook geschikt voor iGoogle Nexus 7 (zie afmetingen).

Now that you’ve got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the RAM Tab-Tite™. With interchangeable cup ends, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet Tab, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your Tab can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

Apple iPad mini (without case)
Amazon Kindle Fire (without case or with thin case / skin) 
Blackberry Playbook (without case or with thin case / skin)
Dell Streak 7 (without case or with thin case / skin)
Google Nexus 7 (without case)
Motorola XYBOARD 8.2 (without case or with thin case / skin) 
Samsung Galaxy Tab 7.0 (without case or with thin case / skin)
Samsung Galaxy Tab 7.0 Plus (without case or with thin case / skin)
Samsung Galaxy Tab 7.7 (without case or with thin case / skin) 

The Tab-Tite™ holder is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:
Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.31"
Depth: 0.125" minimum to 0.56" maximum

Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports

Set 4: RAM Mount Universele X-Grip houder smartphone RAM-HOL-UN7BU
Universele X-Grip houder met 1inch bal voor mobiele telefoon. De RAM X-Grip heeft een vernuftig design met 4 poten die verstelbaar zijn. Compatible met een breed scala aan RAM Mounts. Kenmerken:Perfecte pasvorm door verstelbare poten. Rubberen uiteinden houden de smartphone goed vast. Inclusief B-kogel passend op RAM B-systeem.


Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.

Compatible Devices:
Apple iPhone 5 WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 4S WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 4 WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 3GS WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 3G WITH OR WITHOUT CASE/SLEEVE
Apple iPhone WITH OR WITHOUT CASE/SLEEVE
Apple iPod touch (All Models) WITH OR WITHOUT CASE/SLEEVE
Apple iPod (G1-G5)

En vele andere smartphones, check de maten hieronder

The X-Grip™ holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Holder Dimensions:
Minimum Width = 0.875" (2,2 cm)
(Devices at 0.875" must be a minimum of 4" in height to fit into holder)
Maximum Width = 3.25" (8,3 cm)
Depth = 0.875" (2,2 cm)

Features:
1. Spring loaded holder expands and contracts for perfect fit of your device
2. Rubber coated tips will hold device firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts
4. Single socket technology allows for multiple adjustment angles and articulation of device

Set 5: RAM Mount X-Grip II™ Universal 7 inch Tablet Houder RAM-HOL-UN8BU
RAM-HOL-UN8BU X-Grip II™ Universal 7 inch Tablet Houder bestaat uit een composiet veerhouder, verstelbare grip armen en B-kogel. Inbegrepen zijn extra gemakkelijk grip knoppen, op de achterkant van de houder voor quick release van het tablet. De RAM-HOL-UN8BU rekt uit en krimpt voor een perfecte pasvorm van de meeste 7 " tabletten met of zonder hoes. De U kunt hieronder controleren of afmetingen van het tablet compatible zijn met de X-Grip II ™.

ometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II™ has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II™ is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle.

The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets.

Compatible Devices:
iPad Mini
Amazon Kindle
Amazon Kindle Fire
Archos 7
Asus EEE Pad Memo
Barnes & Noble NOOKcolor
BlackBerry PlayBook
Dell Streak 7
Google Nexus 7
HTC Flyer
Motorola XYBOARD 8.2
Panasonic Toughpad™ JT-B1
Samsung Galaxy Tab (7" version)
Samsung GALAXY Tab 7.0 Plus

All devices that maintain the following dimensions below:

Holder Dimensions:
Minimum Width = 2.25" (5,7 cm)
(Devices 2.25" in width must be a minimum of 7" (17,8 cm) in height to fit)
Maximum Width = 5.75" (14,6 cm)
Depth = 0.875" (2,2 cm)

Features:
1. Spring loaded holder expands and contracts for perfect fit of your tablet
2. Rubber coated tips will hold your tablet firm and stable
3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts
4. Socket technology allows for multiple adjustment angles and articulation of your tablet
5. Easy access grip knobs, located on the back of the holder for quick release of your tablet


Set 6: RAM Mount Tab-tite iPad AIR 10" tablethouder RAM-HOL-TAB6U
De RAM Tab-Tite cradle heeft een veermechanisme waardoor de tablet snel te verwijderen is uit de cradle. Met uitwisselbare uiteinden is is deze houder maximaal flexibel. Alle knoppen en
De RAM Tab-Tite cradle heeft een veermechanisme waardoor de iPad Air snel te verwijderen is uit de cradle. knoppen en uitgangen blijven bereikbaar. Alleen geschikt voor iPad Air ZONDER hoes.

The RAM-HOL-TAB6U consists of a spring loaded backplate and custom support cups. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad Air can be used just as it was intended.

Compatible Devices (WITHOUT CASE, SKIN, SLEEVE):
Apple iPad Air
Apple iPad Air 2


Features:
Support cups contain open slots to accommodate for tablets of various sizesBack plate can support various size support cupsSpring loaded tension provides secure support for your tabletSpring loaded cradle allows for quick release of your tabletFull access to all ports.

Specifications:

Docking Cradle: NoLocking Cradle: NoFit's iPads WITH Cases: NoFit's iPads WITHOUT Cases: YesLow Vibration Environment: YesHigh Vibration Environment: No.

Dimensions:
Height: 8.25" minimum to 10.75" (27,3 cm) maximumWidth: Maximum width to 6.8" (17,3 cm)Depth: 0.5" maximum (1.3 cm).

Eigen filmpje laat de flexibiliteit zien bij tafelmontage en iPad in beschermcase!

Set 7: RAM Mount Universele X-Grip houder 5" Phablets en iPhone 6 plus RAM-HOL-UN10BU

The X-Grip™ IV has a clean and clever four leg design that sports great holding power without hiding your phone or phablet behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the X-Grip™ IV is the phablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phablet and become the most useful accessory in your vehicle.

Compatible Devices:
HTC Droid DNA
Huawei Ascend P1
LG Intuition
Nokia Lumia 920
Pantech Vega No. 6
Samsung GALAXY Mega 5.8
Samsung GALAXY Mega 6.3
Samsung GALAXY Note II
Samsung Galaxy Note 3
iPhone 6 PLus
Samsung Galaxy S5 Active

The X-Grip™ IV holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Holder Dimensions:
Minimum Width = 1.75" (4,4 cm)
Maximum Width = 4.5" (11,4 cm)

Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM ball mounts
6. Lifetime warranty

Set 8: RAM Mount Tab-tite universele iPad Air met dikke case RAM-HOL-TAB20U

De RAM Tab-Tite cradle heeft een veermechanisme waardoor de tablet snel te verwijderen is uit de cradle.  Alle knoppen en uitgangen blijven bereikbaar. Zeer geschikt voor de iPad Air met dikkere bumpercase zoals Otterbox Defender, LifeProof en Griffin Survivor (zie afmetingen) .

The RAM-HOL-TAB20U consists of a spring loaded back plate and custom support cups for the Apple iPad Air. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB20U is just what you need to get the most out of your tablet.

Compatible Devices (WITH CASE, SKIN OR SLEEVE):

Apple iPad Air (2) with (Lifeproof frē & nüüd Case)
Apple iPad Air (2) with (Otterbox Defender Slip Cover Case, Griffin Survivor, Joy Factory Axtion Bold)

Cradle Dimensions:

Height: 9" to 11"  (22.9 - 27.9 cm)
Width: 7.43" (18.9 cm)
Edge Depth: 0.87" (2.2 cm)

Material:

High Strength Composite
Features:

1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
8. Made in the U.S.A.







Bekijk ook onze overige tablethouders voor in de auto.
Bekijk ook onze overige iPadhouders voor de auto.

Reviews

0 sterren gebaseerd op 0 beoordelingen Uw review toevoegen